Getech Equipments International Private Limited
Cherlapalli, Hyderabad, Telangana
SEND SMS
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Unit |
| Material | Solid Carbide |
| Usage/Application | Mining |
| Brand | Getech |
| Length | >300 mm |
| Type | Straight Shank |
| Drilling Rig Type | Land Based Drilling Rigs |
Product Details:
| Size | 90-130mm |
| Brand | Getech |
| Application | Hole Drilling |
| Usage | Mining |
| Grade | A |
| I Deal In | New Only |
Cutting Structure
The reamer mainly consists of four or more cones. Cutting Structure with premium tungsten carbide hardfacing or premium tungsten carbide insert of formulas and new techniques is utilized, and increases wear-resistance capability of reamer. The pilot is tricone bit.
Seal and Lubrication
High performance HNBR O-ring for bearing seal and advanced grease for lubrication.
Product Application
It is suitable for the large size well, mining and infrastructure applications.
Current Main Availability
Recommended Drilling Parameter
| IADC | WOB (KN/mm) | RPM (r/min) | Applicable Formations |
| 517/537 | 0.4~1.0 | 120~60 | Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft limestone, etc. |
| 617 | 0.45~1.1 | 90~50 | Medium hard formation with high compress strength, such as hard shale, limestone, sandstone, dolomite. etc |
| 637 | 0.5~1.2 | 80~40 | Hard formations with high compressive strength, such as sandstone, limestone, dolomite ,hard gypsum, marble, etc. |
| 117/127 | 0.35~0.9 | 150~70 | Soft to medium formations with low compressive strength , such as medium soft shale, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbed, etc. |
| Note: The upper limits of WOB and RPM in above table should not be used simultaneously. | |||
Product Details:
| Minimum Order Quantity | 10 Unit |
| Material | Solid Carbide |
| Length | 1050 mm |
| Brand | Getech |
| Usage/Application | Mining |
| Type | Straight Shank |
| Deal In | New Only |
Brief description:
Water Well Applications
The advantage of friction welding is that, different steel qualities can be chosen for the mid-body section and the tool joints. High quality alloy steel is used for the tool joints, Zero maintenance, and long lasting life of the rods.
The rods have spanner flats on the pin and box ends. Plastic/Metal thread protectors are available for all API connection types.
Key features:
Additional Information:
Product Details:
| Usage/Application | Mining |
| Brand | Getech |
| Material | Carbide Tipped |
| Hole Diameter | 100-200 mm |
| Type | Straight Shank |
| Drilling Rig Type | Coiled Tubing Drill Rigs |
Brief description:
Conversion Sub Acts For Conversion And Connection Of Drill rod Component In water well, mining And Geology Drilling Work. It Is Used Mainly For Connecting Of Upper Drill Tools And Lower Drill Tools During Drilling Operations
Product Details:
| Material | Synthetic diamond micron, tungsten carbide |
| Usage/Application | Mining |
| Diameter | 13.44 +- 0.03 mm |
| Hardness | 800HV |
| Color | Any |
| Packaging Type | Box |
BUTTON BITS
These Button bitshave two flushing holes and are available in three flavors: Flat, Convex and Concave. These Down The Hole (DTH) bits fit the most popular DTH hammers use in water welling, mining, construction and quarrying. We offer a wide assortment of DTH button bits that works with precision and provide accuracy while penetrating into the sub-soil formation of varied nature.
RANGE : 3” to 18”
Product Details:
| Brand | Getech |
| Hammer | 3", 4 3/4", 6", 8", 10", 12" |
| Usage | Hole Drilling |
| Application | Ore Mining |
| Usage/Application | Water Well Drilling |
| Color | Any |
DTH HAMMERS.
DTH Hammers which are provided with optimum functionality and high tolerance power. These tools are extensively used for down-the-hole drilling purposes.Our series of DTH Hammers are valve less hammers with optimized air cycle frequency with high penetration rates. These are heavy duty DTH hammers that well at greater depths by less air usage; delivering minimum performance loss.
Additional Information:
Product Details:
| Brand | Getech |
| Material | Carbide Tipped |
| Surface Finishing | Polished |
| Color | Silver |
| Type | Drill Point Drills - Straight Shank |
| Deal In | New Only |
Brief description:
Water Well Applications
The advantage of friction welding is that, different steel qualities can be chosen for the mid-body section and the tool joints. High quality alloy steel is used for the tool joints, Zero maintenance, and long lasting life of the rods.
The rods have spanner flats on the pin and box ends. Plastic/Metal thread protectors are available for all API connection types.
Key features:
Product Details:
| Material | Carbide Tipped |
| Brand | Getech |
| Color | Silver |
| Finishing Type | Polished |
| Size | As Per Requirement |
| Deal In | New Only |
TRICONE BITS
Tricone rotary bits are sometimes a good alternative to a DTH hammer. Available in TCI (carbide buttons) and mill tooth configurations.
We carry a large inventory of rerun bits and can also supply new bits. TCI bits are available for Medium Soft, Medium Hard, and Hard formations. Please call us to check stock.
Product Details:
| Color | Black |
| Usage/Application | Mining |
| Material | Alloy steel |
| Brand | Getech |
| Deal In | New Only |
| Hardness | 800HV |
BUTTON BITS
These Button bitshave two flushing holes and are available in three flavors: Flat, Convex and Concave. These Down The Hole (DTH) bits fit the most popular DTH hammers use in water welling, mining, construction and quarrying. We offer a wide assortment of DTH button bits that works with precision and provide accuracy while penetrating into the sub-soil formation of varied nature.
Additional Information:
Product Details:
| Color | Black |
| Usage/Application | Mining |
| Material | Carbide Tipped |
| Brand | Getech |
| Hardness | 800HV |
| Deal In | New Only |
BUTTON BITS
These Button bitshave two flushing holes and are available in three flavors: Flat, Convex and Concave. These Down The Hole (DTH) bits fit the most popular DTH hammers use in water welling, mining, construction and quarrying. We offer a wide assortment of DTH button bits that works with precision and provide accuracy while penetrating into the sub-soil formation of varied nature.
Product Details:
| Brand | Getech |
| Application | Mining |
| Weight | 4.5 kg |
| Usage | Drill hole |
| Usage/Application | Drilling |
| Deal In | New Only |
BUTTON BITS
These Button bitshave two flushing holes and are available in three flavors: Flat, Convex and Concave. These Down The Hole (DTH) bits fit the most popular DTH hammers use in water welling, mining, construction and quarrying. We offer a wide assortment of DTH button bits that works with precision and provide accuracy while penetrating into the sub-soil formation of varied nature.
RANGE : 3” to 18”
Additional Information:
Product Details:
| Material | Solid Carbide |
| Length | 1100mm |
| Brand | Getech |
| Usage/Application | Oil Drilling |
| Color | Any |
| Power Source | Electric |
Brief description:
Water Well Applications
The advantage of friction welding is that, different steel qualities can be chosen for the mid-body section and the tool joints. High quality alloy steel is used for the tool joints, Zero maintenance, and long lasting life of the rods.
The rods have spanner flats on the pin and box ends. Plastic/Metal thread protectors are available for all API connection types.
Key features:
Product Details:
| Material | Carbide Tipped |
| Usage/Application | DTH Drilling |
| Length | >300 mm |
| Brand | Getech |
| Color | GOLD |
| Deal In | New Only |
Product Details:
| Brand | Getech |
| Use | Down the hole |
| Application | DTH Drilling |
| Weight | 12 kg |
| Usage/Application | Water Well Drilling |
| Color | Gold |
Additional Information:
Product Details:
| Minimum Order Quantity | 20 Unit |
| Color | Black |
| Usage/Application | Mining |
| Brand | Getech |
| Pack Type | Carton |
| Material Grade | Allow |
| Deal In | New Only |
BUTTON BITS
These Button bitshave two flushing holes and are available in three flavors: Flat, Convex and Concave. These Down The Hole (DTH) bits fit the most popular DTH hammers use in water welling, mining, construction and quarrying. We offer a wide assortment of DTH button bits that works with precision and provide accuracy while penetrating into the sub-soil formation of varied nature.
RANGE : 3” to 18”
Additional Information:
Product Details:
| Air Pressure | 10-25 Bar |
| Face Shape | Flat, Convex, Concave |
| Applications | Water Well Drilling, Mining, Rock Drilling |
| Diameter | 130 mm - 156 mm |
| Size | 5 - 6 inch |
Additional Information:
Product Details:
| Minimum Order Quantity | 10 Number |
| Material | Stainless Steel |
| Length | 810 mm to 1560 mm |
| Outer Diameter | 68 mm to 273 mm |
| Weight | 16 Kg to 580 kg |
| Usage Application | Drilling |
Additional Information:
Product Details:
| Usage/Application | Mining |
| Material | Carbide Tipped |
| Brand | Getech |
| Surface Finishing | Polished |
| Color | Silver |
Brief description:
Water Well Applications
The advantage of friction welding is that, different steel qualities can be chosen for the mid-body section and the tool joints. High quality alloy steel is used for the tool joints, Zero maintenance, and long lasting life of the rods.
The rods have spanner flats on the pin and box ends. Plastic/Metal thread protectors are available for all API connection types.
Key features:
Product Details:
| Minimum Order Quantity | 10 Piece |
| Usage/Application | Mining |
| Material | Carbide |
| Hole Range | 90 - 455 mm |
| Pressure | High Pressure |
| Outer Diameter | 76 mm |
Product Details:
| Surface Finish | Finished Polished |
| Length | 3m |
| Nominal Size | 3 inch |
| Color | Grey |
| Brand | Getech |
Getech offers W and WT thread casing for drilling applications utilizing casing rods.
This casing is intended for single use applications, or situations where the casing is left in the hole. The W casing is made from DCDMA C80 tubing and utilizes the DCDMA W thread form. Featuring a straight thread, this universal casing design can be used in any drilling application where threaded casing is required to be left in the ground.
Product Details:
| Minimum Order Quantity | 01 No(s) |
| Size | 3 to 18 inch |
| Brand | Getech |
| Application | Mining |
| Usage | Drill hole |
BUTTON BITS
These Button bitshave two flushing holes and are available in three flavors: Flat, Convex and Concave. These Down The Hole (DTH) bits fit the most popular DTH hammers use in water welling, mining, construction and quarrying. We offer a wide assortment of DTH button bits that works with precision and provide accuracy while penetrating into the sub-soil formation of varied nature.
Product Details:
| Minimum Order Quantity | 1 Number |
| Make/Brand | Getech |
| Material | Iron |
| Usage | Construction |
| Application | Mining |
Getech is one of the trusted manufacturers and exporters of Cluster Hammers based in India. We manufacture the Cluster Hammers using only the best quality alloys steel and we manufacture these Cluster Hammers to high precision and supreme standards following international industry standards. These Cluster Hammers are heat treated to ensure superb performance. These Cluster Hammers are heat treated in the most modern, fully process controlled and in house facility, located in India. The carbide buttons that are used in the making of the Cluster Hammers are procured from the most trusted foreign manufacturers of India and abroad. These Cluster Hammers are in conformation to the international norms and standards and strict quality control methods. We constantly improve the Cluster Hammers with adaptation of most recent manufacturing technologies.
We have invested considerable amount of time and money for manufacturing qualitative range of water treatment plants and more. Technically advanced machinery is installed at our three production units for ensuring flawless production. Panel of qualified and experienced professionals is also appointed for supervising the various stages of production process for ensuring the best product is sent out in the market. We also have testing facilities and in-house R&D facilities for bringing about new innovation in the field of related products. Our ethical business policies along with timely delivery ofCluster Hammers have helped us receive accolades from a wide range of clients and consumers, and a trustworthy place in the market. Being in collaboration with international suppliers we are celebrating 7 years of excellence in the trade.
Salient Features of Cluster HammersAdditional Information:
Product Details:
| Material | Carbide Tipped |
| Drilling Rig Type | Slim Hole Drilling Rig |
| Hole Diameter | 100-200 mm |
| Thickness | 0.5mm~25mm |
Conversion Sub Acts For Conversion And Connection Of Drill rod Component In water well, mining And Geology Drilling Work. It Is Used Mainly For Connecting Of Upper Drill Tools And Lower Drill Tools During Drilling Operations.
Additional Information:
Product Details:
| Usage/Application | Mining |
| Brand | Getech |
| Material | Carbide Tipped |
| Power Source | Hydraulic |
Brief description:
Conversion Sub Acts For Conversion And Connection Of Drill rod Component In water well, mining And Geology Drilling Work. It Is Used Mainly For Connecting Of Upper Drill Tools And Lower Drill Tools During Drilling Operations.
Additional Information:
Product Details:
| Brand | Getech |
| Size | 2 3/8"-11" |
| Use | Oil drilling |
| Standard | API 7-1 |
Brief description:
Conversion Sub Acts For Conversion And Connection Of Drill rod Component In water well, mining And Geology Drilling Work. It Is Used Mainly For Connecting Of Upper Drill Tools And Lower Drill Tools During Drilling Operations.
Additional Information:
Product Details:
| Size | 3 to 12 inch |
| Brand | Getech |
| Packaging Type | Carton |
| Material | Carbon Steel |
Product Details:
| Minimum Order Quantity | 10 Piece |
| Material | Carbide Tipped |
| Length | 30-60 mm |
| Button Type | Straight Shank, Hex Shank |
| Diameter | 3 and 18 inches |
BUTTON BITS
These Button bitshave two flushing holes and are available in three flavors: Flat, Convex and Concave. These Down The Hole (DTH) bits fit the most popular DTH hammers use in water welling, mining, construction and quarrying. We offer a wide assortment of DTH button bits that works with precision and provide accuracy while penetrating into the sub-soil formation of varied nature.
Product Details:
| Size | 76mm-605mm |
| Material | Carbide |
| Use | Coal Mining |
| Hammer | 2"-12" |
Additional Information:
Product Details:
| Color | Black |
| Usage/Application | Mining |
| Brand | Getech |
| Size | 3 to 18 inch |
BUTTON BITS
These Button bitshave two flushing holes and are available in three flavors: Flat, Convex and Concave. These Down The Hole (DTH) bits fit the most popular DTH hammers use in water welling, mining, construction and quarrying. We offer a wide assortment of DTH button bits that works with precision and provide accuracy while penetrating into the sub-soil formation of varied nature.
Product Details:
| Usage/Application | Mining |
| Length | 1090mm |
| Connection | API 3 1/2" Reg |
| Air Consumption | 7-19m3/min |
Product Details:
| Color | Black |
| Usage/Application | Mining |
| Size | 3 to 18 inch |
| Brand | Getech |
BUTTON BITS
These Button bitshave two flushing holes and are available in three flavors: Flat, Convex and Concave. These Down The Hole (DTH) bits fit the most popular DTH hammers use in water welling, mining, construction and quarrying. We offer a wide assortment of DTH button bits that works with precision and provide accuracy while penetrating into the sub-soil formation of varied nature.
Product Details:
| Color | Black |
| Hardness | 800HV |
| Diameter | 13.44 +- 0.03 |
| Material | Tungsten carbide |
BUTTON BITS
These Button bitshave two flushing holes and are available in three flavors: Flat, Convex and Concave. These Down The Hole (DTH) bits fit the most popular DTH hammers use in water welling, mining, construction and quarrying. We offer a wide assortment of DTH button bits that works with precision and provide accuracy while penetrating into the sub-soil formation of varied nature.
RANGE : 3” to 18”
Product Details:
| Material | Solid Carbide |
| Length | 100-150 mm |
| Color | Grey |
| Brand | Getech |
Brief description:
Water Well Applications
The advantage of friction welding is that, different steel qualities can be chosen for the mid-body section and the tool joints. High quality alloy steel is used for the tool joints, Zero maintenance, and long lasting life of the rods.
The rods have spanner flats on the pin and box ends. Plastic/Metal thread protectors are available for all API connection types.
Key features:
Product Details:
| Diameter | 89 mm |
| Wall Thickness | 7.11 mm |
| Connection | 121 mm |
| Use | Well Drilling |
Brief description:
Water Well Applications
The advantage of friction welding is that, different steel qualities can be chosen for the mid-body section and the tool joints. High quality alloy steel is used for the tool joints, Zero maintenance, and long lasting life of the rods.
The rods have spanner flats on the pin and box ends. Plastic/Metal thread protectors are available for all API connection types.
Key features:
Product Details:
| Material | Solid Carbide |
| Length | >300 mm |
| Color | Black |
| Brand | Getech |
Brief description:
Water Well Applications
The advantage of friction welding is that, different steel qualities can be chosen for the mid-body section and the tool joints. High quality alloy steel is used for the tool joints, Zero maintenance, and long lasting life of the rods.
The rods have spanner flats on the pin and box ends. Plastic/Metal thread protectors are available for all API connection types.
Key features:
Product Details:
| Material | Solid Carbide |
| Color | Black |
| Brand | Getech |
| Usage/Application | Mining |
Brief description:
Water Well Applications
The advantage of friction welding is that, different steel qualities can be chosen for the mid-body section and the tool joints. High quality alloy steel is used for the tool joints, Zero maintenance, and long lasting life of the rods.
The rods have spanner flats on the pin and box ends. Plastic/Metal thread protectors are available for all API connection types.
Key features:
Additional Information:
Product Details:
| Usage/Application | Mining |
| Brand | Getech |
| Drilling Rig Type | Slim Hole Drilling Rig |
| Material | Carbide Tipped |
Cutting Structure
The reamer mainly consists of four or more cones. Cutting Structure with premium tungsten carbide hardfacing or premium tungsten carbide insert of formulas and new techniques is utilized, and increases wear-resistance capability of reamer. The pilot is tricone bit.
Seal and Lubrication
High performance HNBR O-ring for bearing seal and advanced grease for lubrication.
Product Application
It is suitable for the large size well, mining and infrastructure applications.
Current Main Availability
Recommended Drilling Parameter
| IADC | WOB (KN/mm) | RPM (r/min) | Applicable Formations |
| 517/537 | 0.4~1.0 | 120~60 | Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft limestone, etc. |
| 617 | 0.45~1.1 | 90~50 | Medium hard formation with high compress strength, such as hard shale, limestone, sandstone, dolomite. etc |
| 637 | 0.5~1.2 | 80~40 | Hard formations with high compressive strength, such as sandstone, limestone, dolomite ,hard gypsum, marble, etc. |
| 117/127 | 0.35~0.9 | 150~70 | Soft to medium formations with low compressive strength , such as medium soft shale, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbed, etc. |
| Note: The upper limits of WOB and RPM in above table should not be used simultaneously. | |||
Product Details:
| Material | Solid Carbide |
| Usage/Application | Mining |
| Brand | Getech |
| Size | 3"/31/2"/41/2"/51/2"/8" |
Highlights of Induction Hardened Friction Welded Drill Rods |
|
|
|
|
|
Additional Information:
Product Details:
| Material | Solid Carbide |
| Length | 1000mm |
| Brand | Getech |
| Usage/Application | Mining |
Brief description:
Water Well Applications
The advantage of friction welding is that, different steel qualities can be chosen for the mid-body section and the tool joints. High quality alloy steel is used for the tool joints, Zero maintenance, and long lasting life of the rods.
The rods have spanner flats on the pin and box ends. Plastic/Metal thread protectors are available for all API connection types.
Key features:
Product Details:
| Material | Carbide Tipped |
| Brand | Getech |
| Usage/Application | Mining |
| Finishing Type | Polished |
Brief description:
Water Well Applications
The advantage of friction welding is that, different steel qualities can be chosen for the mid-body section and the tool joints. High quality alloy steel is used for the tool joints, Zero maintenance, and long lasting life of the rods.
The rods have spanner flats on the pin and box ends. Plastic/Metal thread protectors are available for all API connection types.
Key features:
Product Details:
| Usage/Application | Mining |
| Brand | Getech |
| Drilling Rig Type | Slim Hole Drilling Rig |
| Material | Solid Carbide |
Hole Opener with Pilot Bit for Horizontal Directional Drilling
Cutting Structure
The reamer mainly consists of four or more cones. Cutting Structure with premium tungsten carbide hardfacing or premium tungsten carbide insert of formulas and new techniques is utilized, and increases wear-resistance capability of reamer. The pilot is tricone bit.
Seal and Lubrication
High performance HNBR O-ring for bearing seal and advanced grease for lubrication.
Product Application
It is suitable for the large size well, mining and infrastructure applications.
Current Main Availability
Recommended Drilling Parameter
| IADC | WOB (KN/mm) | RPM (r/min) | Applicable Formations |
| 517/537 | 0.4~1.0 | 120~60 | Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft limestone, etc. |
| 617 | 0.45~1.1 | 90~50 | Medium hard formation with high compress strength, such as hard shale, limestone, sandstone, dolomite. etc |
| 637 | 0.5~1.2 | 80~40 | Hard formations with high compressive strength, such as sandstone, limestone, dolomite ,hard gypsum, marble, etc. |
| 117/127 | 0.35~0.9 | 150~70 | Soft to medium formations with low compressive strength , such as medium soft shale, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbed, etc. |
| Note: The upper limits of WOB and RPM in above table should not be used simultaneously. | |||
Product Details:
| Material | High Manganese Stee |
| Brand | Getech |
| Use | Trenchless |
| Bit Size | 20"(508MM) |
The reamer mainly consists of four or more cones. Cutting Structure with premium tungsten carbide hardfacing or premium tungsten carbide insert of formulas and new techniques is utilized, and increases wear-resistance capability of reamer. The pilot is tricone bit.
Seal and Lubrication
High performance HNBR O-ring for bearing seal and advanced grease for lubrication.
Product ApplicationIt is suitable for the large size well, mining and infrastructure applications.
Current Main Availability
Recommended Drilling Parameter
| IADC | WOB (KN/mm) | RPM (r/min) | Applicable Formations |
| 517/537 | 0.4~1.0 | 120~60 | Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft limestone, etc. |
| 617 | 0.45~1.1 | 90~50 | Medium hard formation with high compress strength, such as hard shale, limestone, sandstone, dolomite. etc |
| 637 | 0.5~1.2 | 80~40 | Hard formations with high compressive strength, such as sandstone, limestone, dolomite ,hard gypsum, marble, etc. |
| 117/127 | 0.35~0.9 | 150~70 | Soft to medium formations with low compressive strength , such as medium soft shale, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbed, etc. |
| Note: The upper limits of WOB and RPM in above table should not be used simultaneously. | |||
Additional Information:
Product Details:
| Usage/Application | Mining |
| Material | SS |
| Brand | Getech |
| Size | 60-350 mm |
BUTTON BITS
These Button bitshave two flushing holes and are available in three flavors: Flat, Convex and Concave. These Down The Hole (DTH) bits fit the most popular DTH hammers use in water welling, mining, construction and quarrying. We offer a wide assortment of DTH button bits that works with precision and provide accuracy while penetrating into the sub-soil formation of varied nature.
RANGE : 3” to 18”
Product Details:
| Color | Black |
| Usage/Application | Mining |
| Size | 90-130mm |
| Brand | Getech |
BUTTON BITS
These Button bitshave two flushing holes and are available in three flavors: Flat, Convex and Concave. These Down The Hole (DTH) bits fit the most popular DTH hammers use in water welling, mining, construction and quarrying. We offer a wide assortment of DTH button bits that works with precision and provide accuracy while penetrating into the sub-soil formation of varied nature.
Product Details:
| Usage/Application | Mining |
| Brand | Getech |
| Material | Carbide Tipped |
| Drilling Rig Type | Slim Hole Drilling Rig |
Brief description:
Water Well Applications
The advantage of friction welding is that, different steel qualities can be chosen for the mid-body section and the tool joints. High quality alloy steel is used for the tool joints, Zero maintenance, and long lasting life of the rods.
The rods have spanner flats on the pin and box ends. Plastic/Metal thread protectors are available for all API connection types.
Key features:
Additional Information:
Product Details:
| Material | Steel |
| Head Code | Round |
| Usage | Hole Drilling |
| Brand | Getech |
Brief description:
Conversion Sub Acts For Conversion And Connection Of Drill rod Component In water well, mining And Geology Drilling Work. It Is Used Mainly For Connecting Of Upper Drill Tools And Lower Drill Tools During Drilling Operations.
Additional Information:
Product Details:
| Unit Pipe Length | 3 meter |
| Size | 3 inch |
| Brand | Getech |
| Shape | Round |
Getech offers W and WT thread casing for drilling applications utilizing casing rods.
This casing is intended for single use applications, or situations where the casing is left in the hole. The W casing is made from DCDMA C80 tubing and utilizes the DCDMA W thread form. Featuring a straight thread, this universal casing design can be used in any drilling application where threaded casing is required to be left in the ground.
Product Details:
| Unit Pipe Length | 3 meter |
| Brand | Getech |
| Surface Finishing | Polished |
| Usage | Mining |
Getech offers W and WT thread casing for drilling applications utilizing casing rods.
This casing is intended for single use applications, or situations where the casing is left in the hole. The W casing is made from DCDMA C80 tubing and utilizes the DCDMA W thread form. Featuring a straight thread, this universal casing design can be used in any drilling application where threaded casing is required to be left in the ground.
Product Details:
| Brand | Getech |
| Surface Finishing | Polished |
| Usage/Application | Mining |
| Packaging Type | Carton |
Cutting Structure
The reamer mainly consists of four or more cones. Cutting Structure with premium tungsten carbide hardfacing or premium tungsten carbide insert of formulas and new techniques is utilized, and increases wear-resistance capability of reamer. The pilot is tricone bit.
Seal and Lubrication
High performance HNBR O-ring for bearing seal and advanced grease for lubrication.
Product Application
It is suitable for the large size well, mining and infrastructure applications.
Reamer Bit for Drill Well for Oil Mine Water Well Cutting Too
Current Main Availability
Recommended Drilling Parameter
| IADC | WOB (KN/mm) | RPM (r/min) | Applicable Formations |
| 517/537 | 0.4~1.0 | 120~60 | Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft limestone, etc. |
| 617 | 0.45~1.1 | 90~50 | Medium hard formation with high compress strength, such as hard shale, limestone, sandstone, dolomite. etc |
| 637 | 0.5~1.2 | 80~40 | Hard formations with high compressive strength, such as sandstone, limestone, dolomite ,hard gypsum, marble, etc. |
| 117/127 | 0.35~0.9 | 150~70 | Soft to medium formations with low compressive strength , such as medium soft shale, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbed, etc. |
| Note: The upper limits of WOB and RPM in above table should not be used simultaneously. | |||
Product Details:
| Usage/Application | Mining |
| Material | Carbide Tipped |
| Brand | Getech |
| Color | Silver |
Brief description:
Water Well Applications
The advantage of friction welding is that, different steel qualities can be chosen for the mid-body section and the tool joints. High quality alloy steel is used for the tool joints, Zero maintenance, and long lasting life of the rods.
The rods have spanner flats on the pin and box ends. Plastic/Metal thread protectors are available for all API connection types.
Key features:
Product Details:
| Brand | Getech |
| Usage/Application | Rock Drilling |
| Material | Alloy steel |
| Size | 7" |
Product Details:
| Usage/Application | Mining |
| Material | Carbide Tipped |
| Brand | Getech |
| Color | Silver |
TRICONE BITS
Tricone rotary bits are sometimes a good alternative to a DTH hammer. Available in TCI (carbide buttons) and mill tooth configurations.
We carry a large inventory of rerun bits and can also supply new bits. TCI bits are available for Medium Soft, Medium Hard, and Hard formations. Please call us to check stock.
Additional Information:
Product Details:
| Material | Carbide Tipped |
| Brand | Getech |
| Color | Silver |
| Finishing Type | Polished |
Brief description:
Water Well Applications
The advantage of friction welding is that, different steel qualities can be chosen for the mid-body section and the tool joints. High quality alloy steel is used for the tool joints, Zero maintenance, and long lasting life of the rods.
The rods have spanner flats on the pin and box ends. Plastic/Metal thread protectors are available for all API connection types.
Key features:
Product Details:
| Usage/Application | Mining |
| Surface Finishing | Polished |
| Material | Carbide |
| Color | Silver |
TRICONE BITS
Tricone rotary bits are sometimes a good alternative to a DTH hammer. Available in TCI (carbide buttons) and mill tooth configurations.
We carry a large inventory of rerun bits and can also supply new bits. TCI bits are available for Medium Soft, Medium Hard, and Hard formations. Please call us to check stock.
Product Details:
| Color | Black |
| Usage/Application | Mining |
| Brand | Getech |
| Pack Type | Carton |
BUTTON BITS
These Button bitshave two flushing holes and are available in three flavors: Flat, Convex and Concave. These Down The Hole (DTH) bits fit the most popular DTH hammers use in water welling, mining, construction and quarrying. We offer a wide assortment of DTH button bits that works with precision and provide accuracy while penetrating into the sub-soil formation of varied nature.
RANGE : 3” to 18”
Product Details:
| Color | Black |
| Usage/Application | Water Well Drilling |
| Brand | Getech |
| Size | 3 to 18 inch |
BUTTON BITS
These Button bitshave two flushing holes and are available in three flavors: Flat, Convex and Concave. These Down The Hole (DTH) bits fit the most popular DTH hammers use in water welling, mining, construction and quarrying. We offer a wide assortment of DTH button bits that works with precision and provide accuracy while penetrating into the sub-soil formation of varied nature.
Product Details:
| Air Compressor | 600 cfm/200 psi |
| Pull Up Force | 4,700 kgf |
| Drilling Diameter | 8 inch (203 mm) - 14 inch (356 mm) |
| Drill Head Torque | 270 kg.m |
Brief description:
The TPR10 drill rig is ideal for Foundation/ piling drilling application in rock and soft formation. Rock formation using DTH and soft formation using Auger. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The TPR10 rig’s flexibility means it will be mounted on tractor and air compressor will be mounted on separate trolley or truck (Rig can be mounted on two wheel or four wheel tractor upon customer request)
Key features:
Key specification:
Product Details:
| Minimum Order Quantity | 10 Piece |
| Type | Center Drill Bit |
| Size | 8 Inch |
| Surface Finish | Coated |
| Aplication | Well Drilling |
TRICONE BITS
Tricone rotary bits are sometimes a good alternative to a DTH hammer. Available in TCI (carbide buttons) and mill tooth configurations.
We carry a large inventory of rerun bits and can also supply new bits. TCI bits are available for Medium Soft, Medium Hard, and Hard formations. Please call us to check stock.
Product Details:
| Minimum Order Quantity | 10 Number |
| Material | Carbide Tipped |
| Brand | Getech |
| Size | 4-5 inch |
| Surface Finishing | Polished |
TRICONE BITS
Tricone rotary bits are sometimes a good alternative to a DTH hammer. Available in TCI (carbide buttons) and mill tooth configurations.
We carry a large inventory of rerun bits and can also supply new bits. TCI bits are available for Medium Soft, Medium Hard, and Hard formations. Please call us to check stock.
Product Details:
| Usage/Application | Mining |
| Material | Carbide Tipped |
| Brand | Getech |
| Color | Silver |
Brief description:
Water Well Applications
The advantage of friction welding is that, different steel qualities can be chosen for the mid-body section and the tool joints. High quality alloy steel is used for the tool joints, Zero maintenance, and long lasting life of the rods.
The rods have spanner flats on the pin and box ends. Plastic/Metal thread protectors are available for all API connection types.
Key features:
Additional Information:
Product Details:
| Brand | Getech |
| Hammer | 3", 4 3/4", 6", 8", 10", 12" |
| Application | Mining |
| Usage | HDD drilling |
DTH HAMMERS.
DTH Hammers which are provided with optimum functionality and high tolerance power. These tools are extensively used for down-the-hole drilling purposes.Our series of DTH Hammers are valve less hammers with optimized air cycle frequency with high penetration rates. These are heavy duty DTH hammers that well at greater depths by less air usage; delivering minimum performance loss.
Additional Information:
